Last updated: May 16, 2022
Looking to enforce a safe and drug-free workplace for your business around the Tyler, MN area? Workplace drug testing can help you do just that so that you can boost workplace safety, increase productivity, and you may even receive a discount on your workers’ compensation insurance. Many states offer the incentive, and the savings ranges from four up to ten percent.
We provide numerous drug testing services for your business in Tyler that help you to screen out new employees with a substance abuse issue, discourage current staff from using drugs, and identify those who do. All while maintaining compliance with DOT regulations if you’re regulated, or just freeing you up to focus on other aspects of your business if you’re not. And we can conduct drug screening at your location or ours, 24/7/365.
As opposed to traditional laboratories, we’re available 24/7—and we come to your company to minimize downtime. When we’re managing your entire drug-free workplace program, you enjoy all of the advantages without having to deal with the administrative details. With us in charge, you can be sure your workplace drug testing gets done on time, every time, no matter where your team are located or when you need them tested.
No more interrupting the night shift’s sleep cycle to report to a testing lab during regular business hours. Now you won’t need to pull employees off-site for drug testing at a facility leaving the crew a man short. We show up on-site—no matter where it is—totally prepared to professionally administer the test.
When should you conduct drug testing
If your company is regulated by the Department of Transportation, you are required to follow specific regulations in regard to workplace drug testing. Many employers for the general workforce use these regulations when developing their own drug free workplace program.
USAMDT offers Tyler employers a program that customizes your drug testing policies for your unique needs. We’ll also develop and then implement your policy, and provide employee education and staff training at your request.
There are many reasons for workplace drug testing, such as:
Pre-employment drug testing
The Department of Transportation requires that a negative drug test result is on file before a driver is allowed on the road. Many employers for the general workforce require a pre-employment drug test before a new employee begins work as well.
Random drug testing
Most people associate random drug testing with Department of Transportation compliance, however, it’s used in other industries too. The department requires all safety-sensitive staff to have their names added to a random pool. This pool is used to randomly generate a list of employees who are required to take a drug test.
DOT drug testing
The Department of Transportation requires that all members of a safety-sensitive workforce are drug tested before they use a commercial motor vehicle (CMV). Additionally, drivers are placed into the random test pool and may be called up for drug testing regularly throughout the year. Post-accident, probationary, reasonable suspicion, and return to duty testing are also required.
The DOT requires a urine test and looks for the following drugs:
- Amphetamines and methamphetamines
- Opiates including synthetic opiates
Reasonable suspicion drug testing
Your management staff must be trained to spot drug abuse. If they believe an employee is under the influence, they should know the company policy and have everything documented before approaching the employee. The suspected employee must then report for a drug test immediately.
Post-accident drug testing
If there is an accident on-site, drug testing all staff involved can help identify where responsibility lies and defend you from legal liability.
Return to duty drug testing
A registered SAP (Substance Abuse Professional) works with the driver, or other safety-sensitive employees, who had a positive drug test result. The SAP signs them off as able to return to work after that safety-sensitive employee has a negative drug test result.
Drug testing methods
We can perform drug tests throughout Tyler utilizing a variety of different methods, depending on your situation. Each method has pros and cons, and you should speak to one of our specialists if you need help deciding which is best for your needs.
All test samples go through an initial screening. The immunoassay (IA) test identifies a positive or negative result. The majority of drug tests are negative and this cost-efficient test saves employers money because no further testing is needed.
Tests returning a positive result go on for confirmation testing. The gas chromatography/mass spectrometry (GC/MS) test confirms the positive result by identifying the drug and the level contained in the sample.
You need access to a private bathroom, and you must disable the sink and toilet, and pour a bluing agent in the water in the toilet bowl. Privacy concerns could also present a challenge because a test must be performed by a collector of the same sex.
In addition, the privacy factor also provides an opportunity to attempt to cheat the test by adulterating the specimen, which creates a negative dillute or positive dillute drug test result, or even substituting the specimen entirely. However, technological advances in both testing procedures and lab equipment make it increasingly difficult for dishonest employees to succeed.
This testing method identifies drugs from about a half-hour of ingestion up to several weeks after the last use. Chronic marijuana use is an exception to the rule. Regular users can test positive for up to thirty days. You can learn more here: How Long Does Marijuana Stay in Your System?
Employers receive test results in a few days.
Mouth swab / oral fluid
This method of drug testing is relatively newer, yet is still every bit accurate as a urinalysis. It’s also just as fast, simple, and cost-effective. It offers the smallest window of detection though. Still, it identifies most drugs within minutes of use. It only identifies drug use for a period of up to 72 hours prior to the test.
The biggest advantage of the mouth swab drug test is that it can be conducted literally anywhere—even in plain sight of other employees. The test only requires putting a mouth swab between the lower cheek and gum. The employee holds it in place until it becomes saturated. The whole process usually takes less than. Despite the claims we hear many drug users make, the only way to pass a mouth swab drug test is to not use drugs.
Results are received in just a couple of days.
Because it detects recent drug use, it’s becoming a popular choice for random drug testing. In fact, the HHS (The Health and Human Services Administration) approved the use of this test as an alternate drug testing method for all federally mandated employers as of January 1, 2020.
At this time, it’s unclear whether or not the DOT will approve this method into its regulations.
The less common hair follicle drug testing method offers the same ease as mouth swab testing, however, it’s more expensive.
The fact that it offers a 90-day period of detection overrides the added cost in the eyes of more and more employers. In fact, the DOT officially requested that the hair test replace the urinalysis. The request is working through the chain-of-command and many expect to hear the final word anytime now.
This test requires the collector to cut a small (less than 1” wide) amount of hair, preferably from near the base of the scalp, and secure it in a zipper-lock plastic baggie. While this testing method is easy and convenient, some employees may have an issue with having their hair cut.
Body hair can be taken instead and is tested by volume instead of length. Administrators collect enough hair to equal the size of a cotton ball about an inch in diameter.
Body hair provides a longer detection window than head hair. Hair collected from an employee’s head will detect drug use for about 90-days, while hair collected from the body will detect drug use for about a year.
The hair test doesn’t detect current impairment or very recent drug use.